Heavy Duty Gas Spring Monitor Mount
The strongest monitor mount on the market, engineered to carry standard and curved screens up to 57″ and 27 kg, and hold them exactly where you want.
Read moreRead less
A heavy or extra-wide screen asks more than a standard monitor arm can give. The Heavy Duty is built around a strong steel frame and carries a curved ultrawide of up to 57 inches and 27 kg without breaking a sweat.
The gas spring does the work: set your screen to the right height and angle with one hand, and it stays exactly where you let go. That keeps you working at eye level, which spares your neck and back during long days.
Mount it with the included desk clamp or through a grommet hole in your desk. All mounting hardware, the USB cables and a clear manual are in the box. The USB-A and USB-C ports in the base keep your peripherals within reach, and the integrated cable channel keeps your desk tidy.
Ultimate flexibility, maximum stability.
Your desk surface stays clear
Floating the screen off the surface frees the entire desktop and puts the display at true eye level.
One hand is enough
The gas spring carries the weight of your screen, so a single movement of one hand sets it higher, lower or at a different angle. It stays where you let go.
Built for the biggest screens
A curved ultrawide of 57 inches and 27 kg stays perfectly level on it, without sagging and without vibration while you type.
Your desk surface stays clear
Floating the screen off the surface frees the entire desktop and puts the display at true eye level.
One hand is enough
The gas spring carries the weight of your screen, so a single movement of one hand sets it higher, lower or at a different angle. It stays where you let go.
Built for the biggest screens
A curved ultrawide of 57 inches and 27 kg stays perfectly level on it, without sagging and without vibration while you type.




How the arm goes together.
Step by step, from the separate parts to a mounted arm on the desk.
Will it fit your desk?
All the measurements you need before you start mounting.

The full details.
Note: for Samsung Odyssey-series screens a VESA spacer is required. Contact us for advice on the correct spacer.
Frequently asked questions
Which screens fit this monitor arm?
Screens from 24 to 57 inches weighing up to 27 kg, including curved and ultrawide models. Your screen does need VESA mounting holes.
Which VESA sizes are supported?
From 75×75 up to 200×200 mm (75×75, 100×100, 200×100 and 200×200).
Will the arm fit my desk?
With the clamp on desktops 10 to 45 mm thick, or through a grommet hole on desktops 10 to 40 mm thick. Both fittings are included.
How high can I set my screen?
The arm positions the mounting point between 370 and 660 mm above your desktop. That height is measured to the centre of the VESA plate, so it corresponds to roughly the middle of your screen rather than its top or bottom edge.
How far does it tilt, rotate and swivel?
Tilt runs from +60° to −20°, rotation is ±90° and the arm swivels ±180°.
Do I need a spacer for a Samsung Odyssey screen?
Yes. Every Odyssey screen needs a spacer for VESA mounting, and that applies to any monitor arm, not just ours. Which spacer you need depends on your exact Odyssey model, and there are a lot of versions. Email us at support@alberenz.com with your model number and we will work out the right one for you.
What do I need to mount it?
Nothing extra. All screws, the desk clamp, the grommet fitting, the USB cables and a step-by-step manual are in the box.
What are the USB ports for?
There is a USB-A and a USB-C port in the base, handy for charging your phone or connecting peripherals without reaching behind your computer. The USB cables you need are included in the box.
What about warranty and delivery?
You get a 5-year warranty, free shipping and free returns. Delivery takes 3 working days.
The last mount you'll need.
Free shipping, a 5-year warranty and delivery in 3 working days.




























