Monitor Arm with Gas Spring, Dark Grey
A slim arm finished in a clean dark grey, holding your screen above the desktop. The gas spring inside carries the weight, so you move the screen with one hand and it stays where you leave it.
Read moreRead less
A monitor on its own stand sits low and takes up the space right in front of you. This arm lifts the screen off the desk and holds it at eye level, so the surface underneath stays free for a keyboard, a notebook or a laptop.
The gas spring carries the weight, which means height and angle are set by hand and the screen stays where you leave it. One screw adjusts the spring to your monitor, anywhere from a light 17 inch to a 35 inch of 8 kilos.
Mounting is done from the top of the desk with the supplied clamp, on desktops from 1 to 75 millimetres. All screws, the hex key and the instructions are in the box, and the VESA plate comes off the arm so you fit it to your screen first.
Incl. VAT. Free shipping
Finished in a clean dark grey, moved with one hand.
One hand is enough
The gas spring carries the weight of your screen, so a single movement sets it higher, lower or closer. It stays where you leave it, with nothing to tighten.
The desk underneath stays free
The screen hangs from the arm instead of standing on a foot, so the space in front of you opens up and the display sits at eye level.
Landscape or portrait
The VESA plate turns a full circle, so you can stand the screen upright for long documents or code and turn it back afterwards.
The finish is dark grey
Where most monitor arms are matte black, this one has a dark grey finish with a warmer undertone. Next to a wooden or light desktop that reads quieter than black.
One hand is enough
The gas spring carries the weight of your screen, so a single movement sets it higher, lower or closer. It stays where you leave it, with nothing to tighten.
The desk underneath stays free
The screen hangs from the arm instead of standing on a foot, so the space in front of you opens up and the display sits at eye level.
Landscape or portrait
The VESA plate turns a full circle, so you can stand the screen upright for long documents or code and turn it back afterwards.
The finish is dark grey
Where most monitor arms are matte black, this one has a dark grey finish with a warmer undertone. Next to a wooden or light desktop that reads quieter than black.
See how it moves.
A short film of the arm in use, from setting the screen to fitting the clamp under the desktop.
Will it fit your desk and your screen?
The measurements to check before you order.
The full details.
Frequently asked questions
Which screens fit this arm?
One monitor from 17 to 35 inch, up to 8 kilos. Your screen does need VESA holes on the back, 75×75 or 100×100 mm.
How is it mounted?
With the supplied desk clamp, from the top of the desk. It holds a desktop from 1 to 75 millimetres thick. There is no grommet fitting for this arm, so you do not need a cable hole.
How high does the screen go?
The mounting point starts at 260 millimetres above your desktop and has 244 millimetres of travel. That height is measured to the middle of the VESA plate, so roughly the middle of your screen.
Can I turn the screen upright?
Yes. The VESA plate turns a full 360 degrees, so the screen goes from landscape to portrait and back.
Does a heavier screen sag?
Not once the tension is set. One screw matches the gas spring to the weight of your monitor. Turn it up for a heavy 35 inch, down for a light one.
What is the difference with the version for two screens?
That one has two of these arms on a single column, for two screens of 17 to 32 inch. This arm carries one screen and takes a larger one, up to 35 inch.
What do I need to mount it?
Nothing extra. The clamp, all screws, the hex key and the instructions are in the box.
What about warranty and delivery?
You get a 5-year warranty, free shipping and free returns. Delivery takes 3 working days.
Your screen ends up at eye level and your desk stays clear.
Free shipping, free returns and a five-year warranty.
