Dual Monitor Arm with Gas Spring, Silver
One base carries two screens, each on its own gas spring, so both monitors sit exactly where you want them. It takes screens from 17 to 32 inch and up to 8 kilos each.
Read moreRead less
Two screens on their own stands take up the whole desk and rarely end up at the same height. This arm carries both from one column, so you get a single clamp point on the desk edge and a free surface underneath.
Each arm has its own gas spring, so you set height and angle by hand and every screen holds its position. One screw adjusts the spring to the weight of your monitor, anywhere between 17 and 32 inch and up to 8 kilos.
Mounting is done from the top of the desk with the supplied clamp. All screws, the hex key and the instructions are in the box, and the VESA plates come off the arms so you fit them to your screens first.
Incl. VAT. Free shipping
Two screens, one clamp point.
One base, two screens
Both arms share a single column, so a dual setup needs one clamp point on your desk instead of two. Everything under the screens stays free.
Each arm moves alone
Every arm carries its own gas spring. Set one screen higher than the other, and each stays where you leave it.
Landscape or portrait
Seven points of movement per arm, including a full turn at the screen. Put one monitor upright for code or long documents and leave the other flat.
The finish is silver
The arm has a light silver finish, the colour of the aluminium itself. Next to a light desktop or aluminium hardware that sits better than a black arm.
One base, two screens
Both arms share a single column, so a dual setup needs one clamp point on your desk instead of two. Everything under the screens stays free.
Each arm moves alone
Every arm carries its own gas spring. Set one screen higher than the other, and each stays where you leave it.
Landscape or portrait
Seven points of movement per arm, including a full turn at the screen. Put one monitor upright for code or long documents and leave the other flat.
The finish is silver
The arm has a light silver finish, the colour of the aluminium itself. Next to a light desktop or aluminium hardware that sits better than a black arm.
Will it fit your desk and your screens?
The measurements to check before you order.
The full details.
Frequently asked questions
Which screens fit this arm?
Two monitors from 17 to 32 inch, up to 8 kilos each. Your screen does need VESA holes on the back, 75×75 or 100×100 mm.
How is it mounted?
With the supplied desk clamp, from the top of the desk. There is no grommet fitting for this arm, so you do not need a cable hole in your desktop.
How high do the screens go?
The mounting point starts at 260 millimetres above your desktop and has 244 millimetres of travel. That height is measured to the middle of the VESA plate, so roughly the middle of your screen.
Can I set the two screens to different heights?
Yes. Each arm has its own gas spring and its own joints, so one screen can sit higher, closer or at a different angle than the other.
Can I turn a screen upright?
Yes. The VESA plate turns a full 360 degrees, so each screen goes from landscape to portrait and back.
Does a heavier screen sag?
Not once the tension is set. One screw matches the gas spring to the weight of your monitor. Turn it up for a heavy 32 inch, down for a light one.
What do I need to mount it?
Nothing extra. The clamp, all screws, the hex key and the instructions are in the box.
What about warranty and delivery?
You get a 5-year warranty, free shipping and free returns. Delivery takes 3 working days.
Two screens, and a desk that stays clear.
Free shipping, free returns and a five-year warranty.
