The best heavy‑duty monitor arm for 57″ & super‑ultrawide (Samsung Odyssey)

Ultrawide is fantastic—until your arm starts to sag. If you run a 49–57″ curved display like Samsung Odyssey, you’re dealing with big weight, deep housings, and a forward center of gravity. That combination overwhelms many “high‑capacity” arms. This guide explains what to look for, why extra headroom matters, and why a 27 kg / up to 57″ gas‑spring arm is the safest bet.

Why many arms struggle with 49–57″ super‑ultrawide

  • Real‑world weight: The 57″ Samsung Odyssey Neo G9 (G95NC) weighs ~15.4–15.8 kg without the stand, which already exceeds the comfort zone of many mainstream arms. 
  • Depth & 1000R curve: Deep, aggressively curved housings push the mass forward, increasing torque on the tilt/pivot. Brands that support curved often require a heavy‑duty tilt pivot or state lower limits for curved vs flat. ergotron.com
  • Mounting interface (VESA): Odyssey models frequently need a VESA adapter/spacer to mount to any arm. Plan for that up front. 

The solution: a 27 kg arm with true headroom (up to 57″)

The Alberenz® Heavy Duty Gas‑Spring Monitor Arm can support more weight than any other monitor mount on the market.

  • Capacity: up to 27 kg; rated up to 57″—ample margin above a 57″ Neo G9’s stand‑less weight.
  • VESA: 75×75 to 200×200.
  • Adjustability & install: full tilt/rotate/swivel, clamp or grommet mount, integrated cable management.
  • Convenience: USB‑A & USB‑C ports in the base.
  • Price: €139.
  • Note for Odyssey: a VESA spacer/adapter is required (as with any arm). Please contact us for advice on the right VESA spacer.
Alberenz® Heavy Duty Gas Spring Monitor Mount (up to 57 inches) - Alberenz - Monitor mount
Alberenz® Heavy Duty Gas Spring Monitor Mount (up to 57 inches) - Alberenz - Monitor mount
Alberenz® Heavy Duty Gas Spring Monitor Mount (up to 57 inches) - Alberenz - Monitor mount
Alberenz® Heavy Duty Gas Spring Monitor Mount (up to 57 inches) - Alberenz - Monitor mount
Alberenz® Heavy Duty Gas Spring Monitor Mount (up to 57 inches) - Alberenz - Monitor mount
Alberenz® Heavy Duty Gas Spring Monitor Mount (up to 57 inches) - Alberenz - Monitor mount
Alberenz® Heavy Duty Gas Spring Monitor Mount (up to 57 inches) - Alberenz - Monitor mount
Alberenz® Heavy Duty Gas Spring Monitor Mount (up to 57 inches) - Alberenz - Monitor mount
Alberenz® Heavy Duty Gas Spring Monitor Mount (up to 57 inches) - Alberenz - Monitor mount
Alberenz® Heavy Duty Gas Spring Monitor Mount (up to 57 inches) - Alberenz - Monitor mount
Alberenz® Heavy Duty Gas Spring Monitor Mount (up to 57 inches) - Alberenz - Monitor mount
Alberenz® Heavy Duty Gas Spring Monitor Mount (up to 57 inches) - Alberenz - Monitor mount
Alberenz® Heavy Duty Gas Spring Monitor Mount (up to 57 inches) - Alberenz - Monitor mount
Alberenz® Heavy Duty Gas Spring Monitor Mount (up to 57 inches) - Alberenz - Monitor mount
Alberenz® Heavy Duty Gas Spring Monitor Mount (up to 57 inches) - Alberenz - Monitor mount

Alberenz® Heavy Duty Monitorhalterung mit Gasfeder (bis zu 57 Zoll)

169,00 €
149,00 € 
-13% off

Lorem ipsum dolor sit amet, consectetur 

Material

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat.

Comfort guarantee 

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat.

Shipping

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat.

Why the 27 kg headroom matters

  • You operate well below the spring’s max tension → less sagging over time.
  • Tilt stays put even with deep 1000R housings.
  • Future‑proofing: leaves room for heavier successors or add‑ons (light bar, webcam boom).

Compatibility checklist for Odyssey & super‑ultrawide

  • You operate well below the spring’s max tension → less sagging over time.
  • Tilt stays put even with deep 1000R housings.
  • Future‑proofing: leaves room for heavier successors or add‑ons (light bar, webcam boom).

Installation tips (quick start)

  • Fit the Odyssey adapter/spacer first, then lift the display to the arm. 
  • Balance the gas spring: with the monitor mounted, loosen/tighten until it floats at your preferred height.
  • Cable routing: run the thickest cable first (DP 2.1/HDMI 2.1), use the integrated channels. 
  • Ergonomics: top bezel ~at or slightly below eye level; viewing distance often ≥80 cm on 57″.

Comparison of heavy duty monitor arms sold within Europe

Alberenz heavy Duty

Neomounts NM‑D775BLACKPLUS

Ergotron HX + HD Pivot (45‑647)

Max. weight curved monitor

Max. weight curved monitor

Max. weight curved monitor

Max. weight curved monitor

Max. weight regular monitor

Max. weight curved monitor

Max. weight curved monitor

Max. weight curved monitor

VESA compatibility

Max. weight curved monitor

Max. weight curved monitor

Max. weight curved monitor

Max. weight regular monitor

VESA compatibility

USB-C port

USB-A port

Grommet hole connection

Desk clamp connection

Retail price (incl. VAT)