The best heavy‑duty monitor arm for 57″ & super‑ultrawide monitors (Samsung Odyssey)

Written by Bas Hellendoorn 

Published on September 3, 2025

Ultrawide is fantastic—until your arm starts to sag. If you run a 49–57″ curved display like Samsung Odyssey, you’re dealing with big weight, deep housings, and a forward center of gravity. That combination overwhelms many “high‑capacity” arms. This guide explains what to look for, why extra headroom matters, and why a 27 kg / up to 57″ gas‑spring arm is the safest bet.

Why many arms struggle with 49–57″ super‑ultrawide

Super‑ultrawide monitors in the 49‑ to 57‑inch range are stunning to look at, but they come with hidden challenges when mounted on monitor arms. Many users quickly discover that their current arm struggles with the sheer weight, depth, and aggressive curvature of these displays. The result can be sagging arms, limited tilt adjustment, or even an inability to mount the monitor at all. Models like the 57″ Samsung Odyssey Neo G9 push standard arms to their limits, requiring careful planning and heavy‑duty solutions.

Real‑world weight: The 57″ Samsung Odyssey Neo G9 (G95NC) and other ultra wide monitor mounts weigh around ~15.4–15.8 kg without the stand, which already exceeds the comfort zone of many mainstream arms. 

Depth & 1000R curve: Deep, aggressively curved housings push the mass forward, increasing torque on the tilt/pivot. Brands that support curved often require a heavy‑duty tilt pivot or state lower limits for curved vs flat. ergotron.com

Mounting interface (VESA): Odyssey models frequently need a VESA adapter/spacer to mount to any arm. Plan for that up front. 

The solution: a 27 kg arm with true headroom (up to 57″)

The Alberenz® Heavy Duty Gas‑Spring Monitor Arm can support more weight than any other monitor mount on the market.

  • Capacity: up to 27 kg; rated up to 57″—ample margin above a 57″ Neo G9’s stand‑less weight.
  • VESA: 75×75 to 200×200.
  • Adjustability & install: full tilt/rotate/swivel, clamp or grommet mount, integrated cable management.
  • Convenience: USB‑A & USB‑C ports in the base.
  • Price: €139.
  • Note for Odyssey: a VESA spacer/adapter is required (as with any arm). Please contact us for advice on the right VESA spacer.

Alberenz® Kraftig gasfjäder monitorfäste (upp till 57 tum)

129,00 €
149,00 €

Alberenz Heavy Duty Monitor Mount är utformad för skärmar upp till 27 kg och 57 tum, vilket gör den till den starkaste monitorarmen på marknaden. Konstruerad för proffs och krävande användare erbjuder den en robust och pålitlig lösning för tunga skärmar.


Varför välja Alberenz Heavy Duty Monitor Mount?

  • Extremt stark konstruktion – Tillverkad av högkvalitativt stål och aluminium för maximal stabilitet, även med de tyngsta skärmarna.
  • Avancerad gasfjäderteknik – Justera höjd och position på din skärm enkelt med smidig och exakt rörelse.
  • Bred kompatibilitet – Passar skärmar från 17 till 57 tum med ett VESA-fästmönster från 75x75 mm till 200x200 mm.
  • Fullt justerbar – Lutningsvinkel från +85° till -30°, 180° rotation och 180° svängområde för perfekt betraktningsvinkel.
  • Inbyggda USB-A- & USB-C-portar – Ladda enheter eller anslut tillbehör direkt från din monitorarm.
  • Ergonomisk design – Minska belastning på nacke och rygg genom att placera skärmen på idealisk höjd och avstånd.
  • Platsbesparande installation – Montera armen säkert med medföljande skrivbordsklämma eller genomföring och håll arbetsytan prydlig och organiserad.
  • Integrerad kabelhantering – Håll kablarna snyggt dolda för en ren och professionell installation.
  • Enkel installation – Levereras med alla nödvändiga monteringsdetaljer och en tydlig manual för snabb och smidig installation.


Oavsett om du vill skapa en professionell arbetsplats eller uppgradera din gaming-setup ger denna monitorarm den stabilitet och flexibilitet du behöver.


Observera: För skärmar från Samsung Odyssey-serien krävs en distans för VESA-montering. Detta gäller alla monitorarmar som används med en Odyssey-skärm. Kontakta oss gärna för råd om rätt distans.

Quantity

Why the 27 kg headroom matters

  • You operate well below the spring’s max tension → less sagging over time.
  • Tilt stays put even with deep 1000R housings.
  • Future‑proofing: leaves room for heavier successors or add‑ons (light bar, webcam boom).

Compatibility checklist for Odyssey & super‑ultrawide

  • You operate well below the spring’s max tension → less sagging over time.
  • Tilt stays put even with deep 1000R housings.
  • Future‑proofing: leaves room for heavier successors or add‑ons (light bar, webcam boom).

Installation tips (quick start)

  • Fit the Odyssey adapter/spacer first, then lift the display to the arm. 
  • Balance the gas spring: with the monitor mounted, loosen/tighten until it floats at your preferred height.
  • Cable routing: run the thickest cable first (DP 2.1/HDMI 2.1), use the integrated channels. 
  • Ergonomics: top bezel ~at or slightly below eye level; viewing distance often ≥80 cm on 57″.

Comparison of heavy duty monitor arms sold within Europe

Alberenz heavy Duty

Neomounts NM‑D775BLACKPLUS

Ergotron HX + HD Pivot (45‑647)

Max. weight curved monitor

22 kg

14 kg

19,1 kg

Max. weight regular monitor

27 kg

18 kg

19,1 kg

VESA compatibility

7,5x7,5 cm

10x10 cm

10x20 cm

20x10 cm

20x20 cm

7,5x7,5 cm

10x10 cm

7,5x7,5 cm

10x10 cm

USB-C port

USB-A port

Grommet hole connection

Desk clamp connection

Retail price (incl. VAT)

€129

€149

€276

Alberenz Heavy Duty

  • Up until 27 kg

  • Support till 57 inch

  • USB-C & USB-A

  • Product benefit 4  

✔️ 30-Day Money-Back Guarantee