Wall-Mounted Monitor Arm, Dark Grey
Wall-Mounted Monitor Arm, Dark Grey
A slim arm in dark grey that carries your screen on the wall, so nothing stands on your desk any more. The gas spring inside carries the weight, so you move the screen with one hand and it stays where you leave it.
Read moreRead less
A monitor on its own stand sits low and takes up the space you need in front of you. This arm hangs the screen on the wall and holds it at eye level, so your whole desk stays free for a keyboard, a notebook or a laptop.
The gas spring carries the weight, which means height and angle are set by hand and the screen stays where you leave it. One screw adjusts the spring to your monitor, anywhere from a light 17 inch to a 35 inch of 8 kilos.
The wall plate is fixed with two screws, and the screws, wall plugs and hex key are in the box. Because the VESA plate comes off, you screw it onto your screen first and then click the screen onto the arm.
Your screen hangs on the wall and your desk stays completely clear.
One hand is enough
The gas spring carries the weight of your screen, so a single movement sets it higher, lower or closer. It stays where you leave it, with nothing to tighten.
With or without the extension arm
The arm comes in two parts. The extension arm is a fixed part without a spring. The gas spring is only in the last part, the one your screen hangs on. With the extension arm the screen sits closer to you or higher. Leave it out and the screen hangs closer to the wall. Both parts are in the box.
Nothing stands on your desk
The arm is fixed to the wall, not to the desktop. There is no base and no clamp, so the full depth of your desk is left to work on.
The finish is dark grey
Where most monitor arms are matte black, this one has a dark grey finish with a warmer undertone. Next to a wooden or light desktop that reads quieter than black.
One hand is enough
The gas spring carries the weight of your screen, so a single movement sets it higher, lower or closer. It stays where you leave it, with nothing to tighten.
With or without the extension arm
The arm comes in two parts. The extension arm is a fixed part without a spring. The gas spring is only in the last part, the one your screen hangs on. With the extension arm the screen sits closer to you or higher. Leave it out and the screen hangs closer to the wall. Both parts are in the box.
Nothing stands on your desk
The arm is fixed to the wall, not to the desktop. There is no base and no clamp, so the full depth of your desk is left to work on.
The finish is dark grey
Where most monitor arms are matte black, this one has a dark grey finish with a warmer undertone. Next to a wooden or light desktop that reads quieter than black.
Will your screen fit this arm?
The measurements to check before you order.
The full details.
Frequently asked questions
Which screens fit this arm?
One monitor from 17 to 35 inch, up to 8 kilos. Your screen does need VESA holes on the back, 75×75 or 100×100 mm.
How is it mounted?
With the wall plate, which you fix to the wall with two screws. The screws, wall plugs and washers are in the box. All you need yourself is a drill and a screwdriver.
Which walls can I mount it on?
A brick or concrete wall, which is what the included wall plugs are made for. For a hollow wall such as plasterboard you need different plugs, and the wall has to be able to carry the weight of the arm and the screen.
Can I turn the screen upright?
Yes. The VESA plate turns a full 360 degrees, so the screen goes from landscape to portrait and back.
Does a heavier screen sag?
Not once the tension is set. One screw matches the gas spring to the weight of your monitor. Turn it up for a heavy 35 inch, down for a light one.
How does it differ from the monitor arm for the desk?
The arm itself is the same, with the same gas spring and the same VESA plate. This version has a wall plate instead of a desk clamp, so nothing stands on your desk.
Can I use the arm without the extension arm?
Yes. The arm comes in two parts: a fixed extension arm without a spring, and the part with the gas spring that your screen hangs on. With the extension arm the screen sits closer to you or higher. Leave it out and the screen hangs closer to the wall. Both parts are in the box, so you choose when you mount it and you can change it later.
What do I need to mount it?
A drill and a screwdriver. The wall plate, the screws, the wall plugs, the hex key and the manual are in the box.
What about warranty and delivery?
You get a 5-year warranty, free shipping and free returns. Delivery takes 3 working days.
Your screen ends up at eye level and your desk stays clear.
Free shipping, free returns and a five-year warranty.
